5 Major Types of Rug Weaving Methods for Your Home’s Décor Exposed!

Rugs are pieces of art you can use to bring out the beauty of your home’s décor. It is a little mysterious and occupies the largest area of your floor. For instance, how did they weave the carpet? What is the distinction between the different weaving techniques such as tufted, loomed and knotted?

Keep reading to learn about the main types of rugs weaving techniques.

 

 

Here are a few rug jargons before considering the weaving methods:

  • Pile – Described as the depth of a rug from the pedestal.
  • Weft – Described as the parallel yarn passed through the rug. Wefts are edifice blocks to the structure of the rugs.
  • WarpWarp is the perpendicular yarn added to both the bottom and upper beam of the rug. It is the underpinning of any rug.

 

 

Rug Weaving Techniques For Your Home’s Décor 

1. Programmed Rugs 

These rugs are produced by making use of different weaving styles like flat-weave, curved, tufted, and loomed methods. With a machine, you can create a lot of tufted or loomed rugs in one day. In fact, some machine-produced rugs in this category can be compared in quality to their handmade equivalents. However, you cannot fake hand-knotted rugs with the machine type because no other thing can beat the superiority of the right hand knotted rug at a particular point in time.

2. Hand Hooked Carpets 

A rug hooking tool is used in making hand-hooked carpets. The device works by pushing it inside from the frontage of the stuff, where it takes hold of the wool on the rear and then pulls it back to the frontage of the rug. Hand hooked rugs are also made on a foundation fabric, making use of a rug hook tool. This weaving procedure makes character loops.

 

 

3. Hand Knotted Rugs

These are the traditional Persian rugs. A knot is made by following the steps below:

  • From the left side, pass the wool in with a vertical warp.
  • Return it to frontage on the right region of the warp.
  • Transfer it from the right part of the subsequent warp on the left side.
  • Lastly, take it back to the frontage on the left side.

This process produces a knot, and you can now cut it.

 

 

4. Flat Weave And Hand Loomed 

These are carried out on a loom and based on the size of the rug; the procedure takes one to four people execute. The weft or fiber is thrown all the way through the center of the base and top warp, on top of the loom. After that, the weaver will compact the rug with the beater while the warps and wefts are woven together.

On the other hand, a pile is a difference between a flat weave and a loomed rug. The weaver makes use of the same method to make the collection, but it (weaver) places a pipe or rod through the center of the warp, as an alternative to yarn. It raises the yarn and makes a pile. The weaver will make use of the two methods (pipe and yarn) interchangeably all over the rug. In order to complete the process, the loops made by the pipe are either cut or left to have a fuller finish.

 

 

5. Flat Weave Rugs 

Apart from a loomed flat-weave, this type of rug can equally be weaved by using a knot. The hand-knotted rugs are weaved just like the hand intertwined Persian rugs. The weaver makes use of Persian loop, but the similar knot is sustained, instead of cutting the yarn after the next loop. This particular method is frequently swapped with a usual Persian knot and nearly never used for making a carpet by itself.

Conclusion

Choosing the right rug for your home’s décor is all about understanding the way such a carpet was produced. Request to identify the distinction between hand-loomed, and hand-knotted rugs when next you are shopping for a new rug for your home.

 

Leave a Reply

Your email address will not be published. Required fields are marked *